Before a Tampa Electric customer schedules a residential panel or service upgrade, create four connected records: the provider and address confirmation, the Tampa Electric work request, the electrical permit for the authority that governs the address, and the inspection or power-release record that allows the utility handoff to finish.
None replaces another. Tampa Electric coordinates its facilities, meter location, disconnection, and reconnection. The City of Tampa, unincorporated Hillsborough County, Pasco County, or another responsible building authority controls its own permit and inspection record.
Start by confirming both the provider and the permit authority
Tampa Electric describes its territory as Hillsborough County and parts of Pasco, Pinellas, and Polk counties (utility service-area record). That is a footprint, not proof that the utility serves a particular address. Preserve the provider shown for the property before using the utility sequence below.
Then identify the building authority separately. A Tampa mailing address can be inside the City or in unincorporated Hillsborough County, and a Pasco County place name can refer to a municipality with its own process. Our Tampa and Hillsborough permit-office guide explains the City/County boundary check.
The result should name two parties, not one:
- Electric provider: the utility that controls its service and metering facilities.
- Authority having jurisdiction: the building office that controls the address-specific permit and inspection decision.
If either is uncertain, stop at the routing step. Do not ask a contractor’s proposal to stand in for an official address result.
Open the utility record before equipment is selected
Tampa Electric’s current construction page accepts requests for upgrade service and changes to existing service. Its October 2025 Standard Electrical Service Requirements says every project requires a Work Request/Layout Number and calls for contact during the planning stage.
For a service change, the manual says the customer must notify Tampa Electric in advance so the utility can determine whether its service and metering facilities remain adequate. It also assigns Tampa Electric the location decision for new, relocated, or upgraded metering equipment.
Preserve these utility-side fields with the proposal:
- Service address and confirmation that Tampa Electric is the provider.
- Work Request/Layout Number and assigned utility contact or project status.
- Existing and proposed service description supplied to the utility.
- Utility response about the point of delivery, meter location, and any utility work or charge.
- Requested disconnect/reconnect appointment and later status.
This is a coordination record, not a design approval. The same manual says Tampa Electric approval does not substitute for inspection and approval by the responsible authority.
Match the permit record to the address
The reviewed public records expose different details. Use the column for the confirmed authority; do not merge the rows into a fictional Tampa Bay-wide permit.
| Responsible authority | Published intake record | Published inspection or release record | Question to resolve |
|---|---|---|---|
| City of Tampa | Electric Trade Permit for the covered residential route | ELE-Final; City service and final inspection fields are published separately | Which inspections and supporting material apply to this exact service-change scope? |
| Unincorporated Hillsborough County | HillsGovHub permit record; electrical work is outside the new under-$7,500 exemption | ELE-Electrical power release; a published virtual final may be available for Electric Service Repair | Does this permit qualify for virtual review, and which record must reach the utility? |
| Pasco County Building Construction Services | Electric Trade permit for a service change, panel or meter-can replacement | Inspection and closeout sequence must be confirmed for the permit | Is it an equal change-out, or does the scope require schematic, load, floor-plan, and riser material? |
City of Tampa
The City’s residential trade-permit page directs its covered scope to an Electric Trade Permit and lists ELE-Final. The residential inspection page separately publishes electrical service fields—service attachment, weatherhead, meter protection and grounding, and through-roof riser protection—and final fields such as installed panel covers, breakers, and circuit labels.
Those pages help a homeowner ask what will be recorded. They do not prove that every panel replacement has the same inspection sequence. Keep the permit number, submitted scope, review comments, scheduled inspections, results, and final status together.
Unincorporated Hillsborough County
Hillsborough County’s June 2026 permit-exemption page says the new under-$7,500 residential exemption does not apply when the work includes electrical work. The page’s listed electrical exception is a narrow low-voltage item, not a general panel or service-change exemption.
The County’s Development Services FAQ tells applicants to schedule an ELE-Electrical power-release inspection through the permit record. Its April 2026 virtual-inspection page lists an electrical final for Electric Service Repair and requires a specified photo or video submission. That option is limited to County-governed work and does not guarantee that a particular project can use virtual review.
Ask the County which inspection closes the permit, which result releases power, and whether either can use the current virtual process. Preserve the answer and the resulted inspection in HillsGovHub rather than relying on a scheduling screenshot.
Pasco County Building Construction Services
Pasco County’s residential electrical sheet says an Electric Trade permit is required when service is changed and names panel or meter-can replacement as an example. The sheet asks for the project address and contractor information, adds owner-builder and Notice of Commencement records when applicable, and distinguishes an equal change-out from other scopes.
For work other than an equal change-out, the sheet lists electrical schematic and plan information, load calculations, floor plans, and a riser diagram. It also flags a substantial-improvement package for property in a special flood hazard area. Those are published intake fields; the County still decides what the address and scope require.
Coordinate the outage and inspection handoff in writing
Tampa Electric’s service manual says a service change that needs disconnection requires an advance disconnect/reconnect request. The utility coordinates with the electrician, disconnects the service, and later reconnects after receiving an inspection when the authority requires one.
The manual assigns connections to and disconnections from utility-owned equipment to Tampa Electric personnel unless the utility specifically authorizes its narrow overhead-service exception. A homeowner should not treat that exception as permission to remove a meter, break a seal, or direct electrical work.
Before the scheduled outage, put these questions in the project record:
- Who requested the utility work, and what Work Request/Layout Number tracks it?
- Which building authority and permit number govern the address?
- Which inspection or power-release result must be transmitted before reconnection?
- Who confirms that the utility has received that result?
- What happens if the inspection does not pass or the utility-side work changes?
Do not promise a same-day reconnection unless the responsible parties have documented it for the project. None of the reviewed sources establishes a universal outage duration.
Keep a closeout record after power returns
Save the permit’s final inspection and status, the utility reconnect confirmation, approved revisions, and the final equipment description with the contract and invoice. If the permit portal is still open or an inspection is unresolved, ask the responsible building office what remains. If the utility work request is still open, ask Tampa Electric what it still needs.
This record does not prove workmanship or determine whether the design was appropriate. It does make a later warranty, sale, insurance, or service question easier to trace than a folder containing only an invoice and a photograph of the panel.
Source and methodology
Local Service Ledger reviewed nine official Tampa Electric, City of Tampa, Hillsborough County, and Pasco County records on August 1, 2026. We compared each record across six fields: provider, utility request, permit intake, inspection, power release, and reconnection. When a public page did not specify a project step, we preserved it as a question instead of borrowing another authority’s procedure.
We did not inspect electrical work, open a panel, test a portal, submit a request, review a private permit, or contact a utility or building office. No electrician, client, prospect, sponsor, product, or private price was researched, named, recommended, or linked.